1 Question

[cozmin]

 i have SMF 1.1.4

I have a section with 5 boards.
In 1 board i want to have the REPLAY buton / to post ONLY users that have +15 posts .
The users that have -15 posts only see that board .
How can i do this ?

[Ace Frye]

I registered just to answer you on this.

First you need to enable permissions by posts.
Admin > Permissions > Settings > Enable permissions for post count based groups

Next you need to create a membergroup.
Admin > Membergroups > Edit Membergroups (you should be there by default)
When you are on this page, look toward the bottom & you should see a section with the header "Post count based groups"
Down toward the bottom of that is the button "Add Group".

Name the group whatever you'd like as long as it is not already used.
Put in the required posts (15 in this case).
& then permissions is a bit more complicated, you should leave that unless you know what you are doing. If you want to mess with it, cool, but I do not recommend setting the permissions to the levels of Mod or Global Mod (obviously).
Finally, at the end of the options you have Visible Boards. Uncheck the board(s) that you would not like to be seen by this group.

You can use an original one too if you would like though, but no groups require 15 posts if that is what you would like. Either way, next to the group name in the same section were the "Add Group" is you should see "Modify". The options there are different, read them over if you want to change them, otherwise default is fine on all of those. But what you want is the "Visible Boards" section yet again, which you will need to click [Show Boards] next to it.

Final steps here are important, because the membergroup is likely over the other member groups in posts, any member groups under there (and guests too) you will need to modify so that they can not see the boards. That's because of the whole hierarchy of permissions. This also includes the "Regular Members" permissions!

Hope this helps! Feel free to contact me if you need anything, my forum is Forum.PastaStudios.com - but you will need to register. My e-mail address is at AceFrye.com & that should be all you need of me.

--JPF--

Edit: I found that you must also include the regular members permissions.

[cozmin]

Thank you very-very much ! you'r a great man .